This Deep-Dive series is focused on the advantages of Nexus 1000v Solution across spectrum of technologies and how it can be leveraged to enhance your Data Center Virtual Infrastructure to meet the next-generation goals.
Cisco Nexus 1000V Series Switches provide a comprehensive and extensible architectural platform for virtual machine (VM) and cloud networking. The switches are designed to accelerate server virtualization and multitenant cloud deployments in a secure and operationally transparent manner.
From single hypervisor to now a multi-hypervisor virtual networking solution, Cisco Nexus 1000v has come a long way since its launch few years back. Currently 1000v product-line provides complete solution ranging from Switching, Routing, Firewall, Load-balancing to Cloud-Infrastructure.
Vishal Mehta is a Technical Marketing Engineer with Cisco's Data Center Competitive Insights Team based in San Jose, California. Previously he was working as the customer support engineer for Cisco’s Data Center Server Virtualization Technical Assistance Center (TAC) team for the past 3 years with a primary focus on data center technologies such as Cisco Nexus® 5000, Cisco UCS, Cisco Nexus 1000V, and virtualization. He presented at Cisco Live in Orlando 2013, Milan 2014, and San Francisco 2014 (BRKCOM-3003, BRKDCT-3444, and LABDCT-2333). He holds a master’s degree from Rutgers University in Electrical and Computer Engineering and has CCIE® certification (# 37139) in Routing/Switching, Service Provider & Data Center
Ask your Questions in the Discussion forums from February 12 through March 4, 2015
Hi,I‘m planning to use a C9300 as a layer 3 switch... probably someone can tell me which Parameters (switching bandwidth, forwarding rate, etc.) I should pay attention to and understand why, so that I don‘t get any performance problems?thank you for your ...
Hi all We have a fairly simple network, but I now want to add a separate vlan 20 for guest traffic. Until now, we have not had any vlans configured. We have wireless access points and they can attach an SSID to a VLAN. This is working correctly ...
Good Afternoon Brains Trust. I have just completed a fresh install of Cisco Prime 3.9 on both my Primary and Secondary PI servers.I've set up HA in the past on 3.7 with no issues, however when I followed the same procedure on 3.9 I have found that I ...
HiI have been using Packet Tracer for a long time. I first used it on Windows 7 and it was all O.K.Now that I bought a new PC with Windows 10 (last ver.) I have a problem that the association with the pkt extension of my files only runs an empty Packet Tr...