cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

How to Allow pinging of PC-A to Router 1?

650
Views
0
Helpful
3
Comments

Question

There are two PC's on different subnet masks and the Multilayer switch is how I am doing the routing for them to ping. However whenever I try and ping the router, it always comes back with 'host destination unreachable'. For this particular test i am trying to implement an ACL and know that it is possible on the MLS but then the routing seems to be disabled. Any advice for either reaching the router or implementing the ACL on the MLS?

Answer

 

Comments
Engager

Hi @JT4 ,

 

To achieve ping between the PCs, you only have to assign the correct IP gateway on the PCs (currently both have the IP 10.0.0.2).
On the vlan 10 PC you must assign the IP gateway 10.0.0.114
On the vlan 20 PC you must assign the IP gateway 10.0.0.98

 

The IP gateway address must match the IP configured in the MLS vlan interfaces

 

Regards

JT4 Beginner
Beginner

Hi @luis_cordova,

 

Thank you for helping me with that issue but Im still stuck on the issue of not being able to get past the MLS to the router, any advice on that front?

 

Thanks

Engager

Hi @JT4 ,

 

To achieve communication with the router you must configure a routing protocol, such as RIPv2:

 

Router1

router rip

version 2

network 192.168.1.0

no auto-summary

 

MLS

interface GigabitEthernet0/1 

no switchport  <--This command disables the layer 2 functions of the interface and enables it as a router interface

ip address 192.168.1.11 255.255.255.0

 

Multi-layer(config)#router rip

Multi-layer(config-router)#no auto-summary

Multi-layer(config-router)#version 2

Multi-layer(config-router)#net 10.0.0.0

Multi-layer(config-router)#net 10.0.0.64

Multi-layer(config-router)#net 10.0.0.96

Multi-layer(config-router)#net 10.0.0.112

Multi-layer(config-router)#net 10.0.0.120

Multi-layer(config-router)#net 192.168.1.0

Multi-layer(config-router)#ex

 

Regards

 

CreatePlease to create content
Content for Community-Ad