If you want to keep the same features as the version currently running on your router, but do not know which feature set you are using, issue the show version command on your router and paste the output into the Output Interpreter tool. If you plan to use recent software features, check for feature support.
If you need to upgrade the Cisco IOS Software image to a new version or feature set, refer to How to Choose a Cisco IOS Software Release.
If you determine that a software upgrade is required, refer to the document that applies to your platform:
Hi, How can I look at this policer real time values? ASR1001-X#show platform hardware qfp active feature subscriber session id 1426278251 feature policing
Policing Session Info:
Policing Ingress Config:
I am very new to telephony troubleshooting. We are having call quality issues. Here is a sampling from my logging and my the controller that seems to be resetting. Any thoughts would be great. T1-GWY-2921#sh controller T1 0/0/1T1 0/0/1 is up.Ap...
Hi all,Quick question about prefix lists. I'm peering with a partner and injecting a route map IN (BGP), which restricts the prefixes advertised to us, but a quick question, because I'm trying to save the amount of config to be written up. The partner is ...
HI im learning ccent from the cisco booki cant understand what the differen betweent HDLC to eoMPLS /MPLSif someone can explain this and if someone can explain to me what they do (i know what they do but perfectly) just so i will understand...
Hi all,I was facing an issue after 2960X switch upgrading IOS to a higher version, after rebooting.my switch always hangs at CPU rev: BImage passed digital signature verificationBoard rev: 5Testing DataBus...Testing AddressBus...Testing Memory from 0...