The Cisco 2600 series routers have a single Flash SIMM that contains the Cisco IOS Software. The Flash upgrade SIMMs are delivered blank, without any Cisco IOS Software. After the upgrade, the router is in ROM Monitor (ROMmon) mode, and requires software recovery.
To resolve this issue, perform these steps:
Copy the existing Cisco IOS Software to a TFTP server.
We are facing a bit of an issue. What have several servers, and what we want is to prevent one from stealing the IP of another server, but without learning the MAC address of the machine, in case if there are virtual machines running on the server.I was t...
Hello I am having issues when creating a static route... Router b has to communicate with router e but the ping fails I will attach the file and the route to follow (which as a return route has to be the shorter one)
I want to know what is the best practice to design my Meraki and LAN/WAN network.I have a working network right now but I am trying to understand why it is like that and how can I improve it.Please see attached file. ThanksScene Mayer
Prezados, saudações!Venho por meio deste post esclarecer uma dúvida que me surgiu praticando um simulado do exame 100-105 da Cisco.Me deparei com a seguinte questão:"Qual informação é correta acerca da configuração default do Cisco Discovery Protocol?"Ini...
There are four command lines related to generating default routes and direct routes (Cisco7200 15.2(4) M11). I want to know the relationship, differences, and processing behavior of these command lines:1.ipv6 nd autoconfig prefix2.ipv6 nd autoconfig defau...