Hi all!
We are having a problem with the output of the "Interface Utilization Report" of the Health and Utilization Monitor V1.2.1.
Some Interfaces have an "Rx Max%" and "Tx Max%" above 100%. That can not be correct.
Here are two samples of the output (It is a weekly report):
Interface Rx Max% * Rx Avg% Rx Min% Tx Max% * Tx Avg% Tx Min%
Gi0/5 471.39 8.70 0.00 1295.33 12.81 0.09
Gi0/22 1312.45 13.11 0.03 338.69 6.79 0.00
What can be the cause for this output?
Thank you!
