Showing results for 
Search instead for 
Did you mean: 

installing 10g card in 6500



We are trying to install 6716-10g card in our 6506-E switch slot 5 and its coming as power down, do we need to reload the switch?


P1-6506-2#sh mod
Mod Ports Card Type                              Model              Serial No.
--- ----- -------------------------------------- ------------------ ----------
  1  24  CEF720 24 port 1000mb SFP              WS-X6724-SFP      SAL1131WBD
  2  48  SFM-capable 48-port 10/100 Mbps RJ45  WS-X6548-RJ-45    SAL09051KJ
  5  16  FRU type (0x6003, 0x403(1027))        WS-X6716-10GE      SAL134214K    <-------------------------------------10g card
  6    2  Supervisor Engine 720 (Active)        WS-SUP720-3B      SAL10360RX

Mod MAC addresses                      Hw    Fw          Sw          Status
--- ---------------------------------- ------ ------------ ------------ ------
  1  001c.58be.9400 to 001c.58be.9417  2.6  12.2(14r)S5  12.2(18)SXF8 Ok
  2  0013.1a97.eaa0 to 0013.1a97.eacf  6.1  6.3(1)      8.5(0.46)RFW Ok
  5  0025.84f1.31e0 to 0025.84f1.31ef  1.1  Unknown      Unknown      PwrDow  <----------------------------------------10g card
  6  0016.9df6.9d08 to 0016.9df6.9d0b  5.2  8.4(2)      12.2(18)SXF8 Ok

Mod  Sub-Module                  Model              Serial      Hw    Status
---- --------------------------- ------------------ ----------- ------- ------
  1  Centralized Forwarding Card WS-F6700-CFC      SAL1131W9RM  3.1    Ok
  5  Distributed Forwarding Card WS-F6700-DFC3C    SAL13431U62  1.4    PwrDow  <-------------------------------------
  6  Policy Feature Card 3      WS-F6K-PFC3B      SAL10360NY4  2.3    Ok
  6  MSFC3 Daughterboard        WS-SUP720          SAL10360NMW  2.5    Ok

Mod  Online Diag Status
---- -------------------

P1-6506-2#sh ver
Cisco Internetwork Operating System Software
IOS (tm) s72033_rp Software (s72033_rp-IPSERVICESK9_WAN-VM), Version 12.2(18)SXF
Technical Support:
Copyright (c) 1986-2007 by cisco Systems, Inc.
Compiled Sat 03-Mar-07 02:26 by tinhuang
Image text-base: 0x01020150, data-base: 0x01021000

ROM: System Bootstrap, Version 12.2(17r)S4, RELEASE SOFTWARE (fc1)
P1-6506-2 uptime is 5 weeks, 4 days, 17 hours, 22 minutes
Time since P1-6506-2 switched to active is 5 weeks, 4 days, 17 hours, 22 minutes
System returned to ROM by  power cycle (SP by power on)
System restarted at 20:29:48 GMT Fri Nov 27 2009
System image file is unknown

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

If you require further assistance please contact us by sending email to

cisco WS-C6506-E (R7000) processor (revision 1.1) with 491520K/32768K bytes of m
Processor board ID SAL1127TNKY
SR71000 CPU at 600Mhz, Implementation 1284, Rev 1.2, 512KB L2 Cache
Last reset from s/w reset
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
12 Virtual Ethernet/IEEE 802.3 interfaces
48 FastEthernet/IEEE 802.3 interfaces
26 Gigabit Ethernet/IEEE 802.3 interfaces
1917K bytes of non-volatile configuration memory.

65536K bytes of Flash internal SIMM (Sector size 512K).
Configuration register is 0x2102


  1  Pass
  2  Pass
  5  Not Applicable
  6  Pass


You need at least 12.2 (33) SXI to support this module and it will require the reboot.



Check some other slot 3&4

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards