The Common Services/Common Management Foundation (CMF) database, where job information is stored, could be corrupted.
Information about the jobs are stored in the CMF database.
Reset the password for CMF database so Job and Resource Manager (JRM) takes the latest password. Re-initialize the CMF database only if the problem persists.
To reset the CMF database, perform this procedure:
Stop CiscoWorks deamons.
Go to the CSCOpx/bin directory.
Run the dbpasswd.pl script, as shown:
perl.exe dbpasswd.pl dsn=cmf
Note: This is an interactive command. You are asked for the new password and are given an option to encrypt your passord. Your passwords can have letters and numerals (fore example, ascw123). No special characters are allowed.
Start Ciscoworks deamons.
To re-initilize the CMF database, perform these steps:
Hi all, I have an ASR901 that is showing as "Down" from my Solarwinds server. From my server, I can putty into the device but I cannot ping it. If I do a "debbug ip icmp" I can see the router showing this:ICMP: echo reply rcvd, src 10.2.2.90, ds...
Greetings. (Sorry for my english)A few days ago I purchased from eBay a used 2901 router.The router came with only two built-in connections (g0 / 0 g0 / 1) with no ehwic extensions.I connected the router to a home router that provides a 1gbps fiber connec...
Hi,I have problem with power consumption of switch Cisco Catalyst 2960S-48TS-L. There is max. consumption 52W in 100% utilization in datasheet, but I measured 90-100W power consumption with no load. Problem is that UPS time of this switch is half of assum...
Hello guys,I'm still new here so, I apologize in advance if I posted the question incorrectly.I'm trying to create a network that consists of 2 buildings. Each building has 3 floors and each floor has its own local network. Below is the IP table for the l...