cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Monitoring access ports with DFM

1487
Views
0
Helpful
0
Comments

DFM monitors per default only IP interfaces and trunk ports. However, in some situations it would be desirable to monitor specific access ports, for example, those connected to critical end systems like mainframes, or those connected to network devices like routers, firewalls or load balancers. For that purpose, customizable groups can be configured that include the access groups to be monitored.

For more information about customizable groups see http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_device_fault_manager/3.1/user/guide/cfgGroup.html#wp1059743

Back to CiscoWorks Device Fault Manager

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards


This widget could not be displayed.