This script implements multiple pipe support from the IOS command line.
Script Modified Date:
Aug 17, 2010
Cisco IOS Version tested:
Cisco Products Tested:
Environment Variables used:
Script Info URL:
How many times have you wanted to do "show run | inc snmp | redirect flash:/snmp.cfg"? Up until now this wasn't possible because IOS only supports one pipe. The other pipes are treated as part of the argument to the first pipe command. The cl_multi_pipe.tcl EEM policy enables the support for multiple command pipelines. You can run as many pipe commands as you want.
Hello - I need help with this error on my router. I haven't try to reboot it yet but I'm just wondering what might have caused this error. From the Internet forum, it seems like a hardware issue. What can I do to determine the root cause? Do I have a...
Hello, I have one problem with Cisco prime. I am not getting recent change information from the tab. I have done everything but for no purpose. The picture is attached. Please guide me so that I can check my recent changes in cisco 2960. Cisco ...
How a switch can recognize traffic as “video” and what knobs inside a switch are available for a network designer to achieve this requirement???There are Media net on the switch that can automatically detect the device type connected to the...
Hi all. For a couple of years I've had two Cisco 1941 routers running IOS and BVI interfaces to support some end user devices. I have two Cisco ISR4321 running IOS-XE which from what I've read you must do BDI interfaces. I attached a diagram and applicabl...
Dear all,Now I have been investigating whether Cat65-MSFC can configureNetFlow NAT record or not. For instance other vendor such as FortiGate can support so I think Cisco might support for this.https://docs.fortinet.com/document/fortigate/6.0.6/handb...