This script implements multiple pipe support from the IOS command line.
Script Modified Date:
Aug 17, 2010
Cisco IOS Version tested:
Cisco Products Tested:
Environment Variables used:
Script Info URL:
How many times have you wanted to do "show run | inc snmp | redirect flash:/snmp.cfg"? Up until now this wasn't possible because IOS only supports one pipe. The other pipes are treated as part of the argument to the first pipe command. The cl_multi_pipe.tcl EEM policy enables the support for multiple command pipelines. You can run as many pipe commands as you want.
Our 911 center purchased a RV320 to be used solely for 4G internet access via ethernet connection. On the compatibility list includes Verizon's new USB730L. Trying to set it up and it doesn't seem to recognize the device. Contacted Veriz...
We have Cisco DX80 set up to acquire IP Address via DHCP and It's connected to a switchport. I also configured a Static DHCP on our cisco 2911 router for the DX80. The switchport is correctly configured with the right vlans and all service vlans are being...
HI community, im having issues to understand why this QoS is behaving like this.router is 4331/k9 my understanding is since the main Policy(parent) is CBWFQ it assigned up 50% and 40% to the class in the main. then the remaining BW is assigned to the...
I am getting confused with the input output rate of an interface, how can my input rate be less than my output rate? example below:Load-Interval #1: 30 seconds30 seconds input rate 11246640 bits/sec, 20009 packets/sec30 seconds output rate 165052558...
how do i use DHCPv6 services in Server-PT and how do i get the info of DUID in my own server without using fully using command in router to assign ipv6 addresses to every devices? Sorry I am new in this field hope you guys can get what I meant . In these ...