This script implements multiple pipe support from the IOS command line.
Script Modified Date:
Aug 17, 2010
Cisco IOS Version tested:
Cisco Products Tested:
Environment Variables used:
Script Info URL:
How many times have you wanted to do "show run | inc snmp | redirect flash:/snmp.cfg"? Up until now this wasn't possible because IOS only supports one pipe. The other pipes are treated as part of the argument to the first pipe command. The cl_multi_pipe.tcl EEM policy enables the support for multiple command pipelines. You can run as many pipe commands as you want.
Hi, I tried search for Route_1 & Route_2 in sh run but there is none.Where can i find IP for Route_1 & Route_2? Ping Route_1 & Route_2 also cant. ip route 0.0.0.0 0.0.0.0 Vlan10 172.30.219.81 name Route_...
I would like to manage all of our hardware in our system including historians. However we struggle to find out the cisco versioning. How does cisco manages the versions of the hardware? We are only interested in major ch...
Hi; I've configured Xconnect over MPLS Cloud between 2 sites Xconnect is showing up but there is no reach-ability between the 2 sites from LAN your help R1 (ISR 4321)pseudowire-class R1encapsulation l2tpv3ip local interface Loopback100inter...
i have switches already configured with snmpv3 and i need to move the configuration to other switches and have some understanding of the commands: 1-does "access snmplist" is an access-list that points to the server which is using the snmp like solar...