Step 1: Power OFF and Power ON the device
|
Step 2: Hold mode button till u reach switch prompt
|
Step 3: Once you reach switch mode, Give following commands
|
switch: flash_init
|
switch: load_helper
|
Step 4: Give switch: dir flash: command to check the config.text file
|
<config.text file contains the password>
|
Step 5: Rename the config.text file to some other name like config.old
|
Step 6: Enter command 'boot' and switch starts booting
|
Step 7: After booting, set your new password from config mode.
|
Reference Link: https://www.youtube.com/watch?v=r88HmwQGd0s