Join us for the next Cisco TechAdvantage Webinar, a 1-hour technical discussion on becoming BYOD-ready (Bring Your Own Device) first hop with two protocols and a single security policy.
As BYOD becomes more and more prevalent, it is important to keep in mind that most of the devices support both IPv4 and IPv6 - thus, even if you do not provide yet IPv6 connectivity, you still need to maintain the same protection as with IPv4. In this webinar you will briefly refresh available first hop security measures for IPv4, and focus on the new features that provide the matching functionality for IPv6. We previously conducted a webinar on L2 security (May 2012) and we are revisiting this topic due to popular demand.
Introduction to BYOD, IPv6, and L2 Domain Security
Review the available first hop security measures for IPv4
“Use Serviceability Features to Troubleshoot your Cat9K as a Cisco TAC Engineer”
This special event is open only to Cisco Customers and Partners.
Many pages in the Cisco Community are accessible only to Cisco customers, partners, or logged in ...
i am new to this and learning by doing on the waywhat i try to achieve in the moment is to reroute the port 80 on pc 0to 100 on pc 0 this is how i forward external internet trafic to itip nat inside source static tcp 10.1.1.1 100 interface Cellular0/...
hi everyone this topic is been posted few time and there were some solutions but its not working. Below are the logs from a access layer switch(c3650) which blocks the trunk port. this switch is connected to a layer 3 switch(c3850) in that switch its...