Provides the ability for a Cisco ISR, IR or CGR router to automatically return its cellular service to LTE if it has fallen to 3G or 2G (if LTE service is available). Without the applet, the router may remain on 3G even if LTE service is available. This is due to current LTE standards as implemented in LTE modems and networks.
•Automatically restores ISR Radio Access Technology (RAT) to 4G LTE if it has fallen to 3G or 2G
•This can temporarily occur due to weather conditions, interference, cellular network congestion
•Although LTE reselection is automatic, standards dictate that a device’s LTE modem be in idle mode to reselect (up to 15 seconds w/no traffic up or down). Easy for phones, not for routers
•This app can be set to run at any desired frequency and/or time-of-hour/day/week.
This version supports a single ISR cellular interface. Note that there is a cellular service disruption of ~15 seconds if in 2G/3G mode and the app attempts to restore 4G operation.
Requires one environment variable called timer and the value must be in form of crontab. Example to run the script everyday at midnight local time.
sureties to make your CCNA 200-125 test a triumph in the event that you study and practice enough. You just can't just hope to pass CCNA 200-125 test without putting your exertion. Alongside considering enough, it is critical to keep up your consistency. ...
My devices connected to my Home Router are not able to ping down to my Cisco lab. The furthest I can successfully ping to is my Cisco 2811 Router exit interface fa0/0 ( 192.168.1.254). Here is my topology:A gentleman before suggested using static routes f...
We have been trying to capture management data from our smart UPS's in our network. Recently I have been trying to configure Prime to do just that with a little tweaking. But I can't get SNMP to communicate.I have verified SNMP v3 credentials are correct ...