Provides the ability for a Cisco ISR, IR or CGR router to automatically return its cellular service to LTE if it has fallen to 3G or 2G (if LTE service is available). Without the applet, the router may remain on 3G even if LTE service is available. This is due to current LTE standards as implemented in LTE modems and networks.
•Automatically restores ISR Radio Access Technology (RAT) to 4G LTE if it has fallen to 3G or 2G
•This can temporarily occur due to weather conditions, interference, cellular network congestion
•Although LTE reselection is automatic, standards dictate that a device’s LTE modem be in idle mode to reselect (up to 15 seconds w/no traffic up or down). Easy for phones, not for routers
•This app can be set to run at any desired frequency and/or time-of-hour/day/week.
This version supports a single ISR cellular interface. Note that there is a cellular service disruption of ~15 seconds if in 2G/3G mode and the app attempts to restore 4G operation.
Requires one environment variable called timer and the value must be in form of crontab. Example to run the script everyday at midnight local time.
Hey Guys, Can you please help me troubleshoot this?I'm trying to setup IPSEC tunnel between Cisco 887VAMG2 (LAB) and Ubiquity USG. crypto isakmp policy 10
if tow routers advertise the same prefix to each other, which router is selected to advertise first ? Router1 and Router2 advertise 192.168.1.0/24 to each other, which one will advertise it? Can I control it ? thanks !!
Hi All,Looking for any ideas on this issue i'm currently having. It is very similar to this issues here: https://community.cisco.com/t5/small-business-switches/help-me-to-create-ipv4-based-acls-for-vlans-using-gui/td-p/2645142 I tho...
As I know, VXLAN uses OSPF for its underlay. However, it seems BGP is involved in the underlay, but I cannot figure out the purpose. A VTEP encapsulates a packet, and if OSPF is deployed, every device should be able to route the packet to another VTE...