Provides the ability for a Cisco ISR, IR or CGR router to automatically return its cellular service to LTE if it has fallen to 3G or 2G (if LTE service is available). Without the applet, the router may remain on 3G even if LTE service is available. This is due to current LTE standards as implemented in LTE modems and networks.
•Automatically restores ISR Radio Access Technology (RAT) to 4G LTE if it has fallen to 3G or 2G
•This can temporarily occur due to weather conditions, interference, cellular network congestion
•Although LTE reselection is automatic, standards dictate that a device’s LTE modem be in idle mode to reselect (up to 15 seconds w/no traffic up or down). Easy for phones, not for routers
•This app can be set to run at any desired frequency and/or time-of-hour/day/week.
This version supports a single ISR cellular interface. Note that there is a cellular service disruption of ~15 seconds if in 2G/3G mode and the app attempts to restore 4G operation.
Requires one environment variable called timer and the value must be in form of crontab. Example to run the script everyday at midnight local time.
HelloNeed HelpWe Project buy C9200L-48T-4X. So we have 4 ports Uplink SFP+Can I use 2 Uplinks with SFP_1G And 2 Ports SFP+10G at Same Time.On the C9200L-48T-4X, I want have 4 uplinks : 2 ports 1GB (SFP) And 2 ports 10GB (SFP+)
Hi All.I Have a question about Cisco Switches Stacking in General. Does Switch Stacking Lead to increase(sum of all stacked switch dram) of total Dram and Processing strenght? I mean, all Switches DRAMs and CPUs will act as a Pool as below example:Total_D...
Hi all, I am facing very strange problem in my setup. I have two routers (1 cisco 4431/k9, 1 cisco 2900) both are connected point to point via service provider and there is a lan behind the router both the side.I have configured the default route on ...
Hi Frineds,I am having issue with integration between Cisco and Hirschman switches. there is different pattern of cisco mrp domain-id which is FFFFFFFF-FFFF-FFFF-FFFF-FFFFFFFFFFF and in Hirschman 255.255.255.255.255.255.255.255.255.255.255.255....
Hi Everyone, I am trying to ping from PC10 to PC-class1-internet but i am unable to do so . I have configured OSPF protocol on both the routers (R1 & R2) and all on the interfaces but still cant. THe network topology is atta...