Provides the ability for a Cisco ISR, IR or CGR router to automatically return its cellular service to LTE if it has fallen to 3G or 2G (if LTE service is available). Without the applet, the router may remain on 3G even if LTE service is available. This is due to current LTE standards as implemented in LTE modems and networks.
•Automatically restores ISR Radio Access Technology (RAT) to 4G LTE if it has fallen to 3G or 2G
•This can temporarily occur due to weather conditions, interference, cellular network congestion
•Although LTE reselection is automatic, standards dictate that a device’s LTE modem be in idle mode to reselect (up to 15 seconds w/no traffic up or down). Easy for phones, not for routers
•This app can be set to run at any desired frequency and/or time-of-hour/day/week.
This version supports a single ISR cellular interface. Note that there is a cellular service disruption of ~15 seconds if in 2G/3G mode and the app attempts to restore 4G operation.
Requires one environment variable called timer and the value must be in form of crontab. Example to run the script everyday at midnight local time.
Hi All I have build my SWAN lab in eveng just to practice some basic stuffs . I am trying to install manual certification in vbondthrough xca , but i am encountering this error every time . I am using quite old IOS 16.2....
Hello,I would like to restore running-config and vlan.dat on a cisco 3850 switch.I have the old configuration on a txt file.On the switch, I have the startup config file in the nvram folder.On the other hand, the vlans do not appear in the conf, they are ...
Hey guys, currently looking into network management and monitoring solutions for a network containing both cisco and ciena network devices. We've seen both company's vendor specific management software (Prime Infrastructure and One Control), but I'm looki...
Hopefully this can be done. I have tirelessly looked through the forums and tried to see if others can do the same and tried different configs but no go. Here is what I am trying to do.I have a USG Router with 2xWAN ports and 1xLAN port WAN1 = ...
Hello. Can you help me. How the PC ping the router interface. The PC able to ping the vlan 701 interface in the SW. How do I get the PC to ping the router interface? Below the configs swich and route: ********SW*****************************...