Designed for plug-and-play access on local networks, Zeroconf is constrained on the campus, where traffic is segmented on different VLANs. But with BYOD growing in workplaces and schools, users expect their devices to work seamlessly, so they can find media players, printers and other resources just like they do at home.
The Cisco Service Discovery Gateway is a new feature for Catalyst switches that solves this problem. With Cisco, network administrators can now enable mDNS and DNS-SD across local network boundaries to provide service discovery on their campus.
By attending this webinar, you will learn how to manage and deploy mDNS / DNS-SD in your network so that end-users can bring their own device and have the experience that they expect.
Date: Wednesday, August 7th, 2013
Time: 8am Pacific Time
View the Webinar: WebEx Replay - don't miss the live demo at 44:20 of the recording.
I currently have an ASA in production and have a question about setting it up in Active Passive failover. I've got a 2nd unit that is the same with same firmware and everything. If I want to setup the passive unit will it cause downtime? My curr...
Hi,So I have a brand new (bought about 2-3 months ago) ISR4331-SEC/K9 running 15.something.something and I have just started booting it. I would like to enable the WebUI which I hope is similar to an SG350 WebUI where I can actually configure everything w...
Hello, I'm running into issues running a packet capture on an ASR920 (using configurations that work on other router models). When setting up an ip cef capture point, the captures are coming up with no data. Tried testing on a physical interface and ...
RSP720-3C-GE .Hot Standby - Supervisor Module reboots Continuously in Cisco 7609-S router and there is no crash info messages in slave-sup-boot-disk.i have done troubleshooting 1. Active/standby image version same2.checked Active sup engin...