Technote of the day (TOTD) -- How to configure External Authentication for users using TACACS on the Cisco DNAC?
Prepared for:Cisco DNA Customers, CX Support Teams
Prepared by:Tomas de Leon, Technical Leader Feb 16, 2019 Document number:02162019_v1
Objective The objective of this document is to provide users an example of enabling external authentication for access to the Cisco DNAC. This technote will focus on configuring the Cisco DNAC & the Cisco ISE for using the TACACS protocol for user authentication. For this technote, there is an assumption that the integration between the Cisco DNAC and the Cisco ISE is already configured and in an "Active" state.
Goals Provide an example of configuring the Cisco DNAC & the Cisco ISE for using the TACACS protocol for external authentication of users.
The following technote is written against theCisco DNA Center version 1.2.8 Patch Releaseand theCisco ISE version 22.214.171.1247 Patch 5.The following technote is written to help answer the questions in regards to configuring the Cisco DNAC & the Cisco ISE for using the TACACS protocol for user authentication.
Cisco DNAC version 1.2.8
Cisco ISE version 126.96.36.1997 Patch 5
Cisco Digital Network Architecture Center Administrator Guide, Release 1.2.8 Chapter: Manage Users
Hello Expert,I have two cisco router in HSRP configuration.On each router I have a 4 port card.The vlans configured on the card (both primary and secondary router) are Production Telephone,Security vlan.I am to configure an use HSRP on the production vlan...
Hi Team, Is there cisco recommend RSTP to MSTP migration procedure ? I didn't find any cisco related document for this. Currently network consist of Core (6500 Series) Switches, distribution (4500 series) switches and Access (3850, 2960X an...
Hiat first i want to say that am a newbie in networking and i come from germany so my englisch is not the best.So, here is my Problem: I have a Server at home for general purpose and the home lan i share with my family.My router is a Fritzbox 7490 an...
Hello.I'm having an issue with SSH console slowness once connected into a network device on GNS3. It generally slow on any router/switch regardless of the configuration to ssh/vty lines.If using Telnet it's perfectly fine and very responsive but ssh is sl...
I'm trying to connect 2 sites to the main office in the middle using VPN I already configured the left side and It works fine but I can't seem to connect the right side to the middle network, here are all the configuration commands i used, !on ...