Networking Knowledge Base

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

 
Labels

Knowledge Base Articles

IntroductionRequirementsAnycast GWDHCP Flow in The Fabric Introduction In a typical network a DHCP flow would look something like this.       If your DHCP server resides on a different subnet (which will most probably be the case) you would use the...

DHCP flow.png dhcp flow challenge.png dhcp fabric flow.png step1.png
ldanny by Cisco Employee
  • 11300 Views
  • 3 comments
  • 16 Helpful votes

Introduction:Configuration Example:Verification:Related Information: Introduction: DHCPv6 guard feature blocks DHCP reply and advertisement messages that originate from unauthorized DHCP servers and relay agents that forward DHCP packets from servers...

ashirkar by Level 7
  • 8640 Views
  • 2 comments
  • 15 Helpful votes

The Cisco Document Team has posted an article. This document describes data plane connection problems that might arise on vEdge routers after you successfully connect to the control plane. Know of something that needs documenti...

ResolutionThe spanning-tree portfast disable command explicitly disables PortFast for the given port. The configuration line appears in the running-configuration because this is not a default option.The no spanning-tree portfast command implicitly en...

TCC_2 by Level 10
  • 14421 Views
  • 1 comments
  • 1 Helpful votes

Taken fully from http://nusdsmhs.ss4.sharpschool.com/UserFiles/Servers/Server_41705/Image/CCNA%20IOS%20Commands%20Summary%2010-1-14.pdf Troubleshooting, Editing, Port #’s show ip interface brief (display interface designations, IP address and status)...

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Top Contributors

 
Featured Article