If 4500 is connected in VSS then follow below steps,
copy bootflash: slavebootflash:
Set the boot register to 0×2102 for the switch to boot from the BOOT variable.
If it is not set then it will try to use 0x2101 setting and will lead to use the first file found in the bootflash. If there is no other IOS then ignore this else configure the register with 0x2102. 0x2102 will use the boot system command which you will set in next step.
Hello Expert, I have a copy of c890-universalk9-mz.158-3.M6.bin ios image and would like to install same on C892FSP model router.Could this be done the reason I am updating IOS is allow me to use dh group 14 the current version has gr...
Hi All, Is it supported for a fabric edge to also operate as a fabric internal border? We have a router that needs to connect to our network and based on its location the easiest place to connect it will be fabric edge. The router has a couple of net...
Hello,The http server web interface header is missing information that would be nice to have.The switch was like this during first log in.I did update the IOS/Web UI to Release 15.2.7E3 but same results.Here's a screenshot.
Hello, I own a domain name, let's call it mydomain.us, and I have a few hosts that are multihomed and have a public IP as well as a private IP, and I am trying to see if I can do the following on a Cisco 2951 router. If I want to use the same ho...
Hi Guys, I am unable to add new node to Cisco CTC. By following the standard node addition process (adding a node from File menu) I am unable to add new node to current CTC view. Any advise and suggestions are welcome BR,