One of eight use cases which highlight the impact service providers have made by connecting rural communities. The social impact of connecting rural communities is life changing. These stories come from the 2013 VNI Service Awards program.
2 Router connected with 2 ISP and EBGP configured. Now i want to load balance incoming traffic. Via ISP 1 70% traffic and via ISP 2 30% traffic. For more understand please check my attached screenshot.
Hello Bro, I have a case here that confused us here.a switch port with connected ip phone in a voice vlan and pc connected through the ip phone in access vlan.everyhting is going well but last night at 5:38AM...
2960 Plus Series Model Switch WS-C2960 +24TC-L cannot enable the REP and Nor CIP function in the default Vlan.
The problem that I am facing is that using the Supervisory automation system: Indusoft + CLP + Cisco 2960 Switch we are experiencing slow...
we to filter some specific prefixes, Quest-How network 188.8.131.52/172.16.0.0/192.168.1.0 with wildcard 0.0.0.0 used ? is wildcard mask correct ? also subnet mask 255.0.0.0 with wildcard 0.0.0.0 ? team plz explain
I need to add one C2960X switch to my DellS3148 switch.what are the things to take note for the trunk port between the 2 switches.will be using normal UTP cables to connect both.my management vlan is VLAN2 and I need VLAN1, VLAN2 and VLAN16 on the connect...