It is vsat connectivity............... every link is coming throughmodem to switch & then going to fe port of router ...in every remote side.................
every site having same setup.shown in diagram..............we have 40 sites....................... every site having one router & two c& ku band modem...........
In this scenario we have two remote sites (remote side 1 & remote side 2) which is connecting on IP GATEWAY .
Working style of modem:-
we are using c band modem & ku band modem (supports Rip V2).One end of both the modem is connected to switch & another end is communicating over satellite freq with hub BASED IP GATEWAY.
1.If packet is going through wan1 then return path should be wan 1. If forward path is wan 1 then return path should be wan1. Remote side 1 to remote side 2 communication is given below.
2.Means remote side 1 cband modem >>>>>>huB BASED IP GATEWAY ) >>>>then it is going on remote side 2 c band>>>& reverse should be in the same band means C band....
3. i would like all the video & data traffic translated to c band & in case of primary link down C band traffic should be translated on KU band.
FOR VIDEO & DATA, PRIMARY BAND IS C BAND & KU BAND IS SECONDARY.
4. In case of voice , i would like all the voice traffic translated to the Ku band & during primary link down KU band traffic should be translated on C band.
For voice , KU Band is primary & C band is secondary.
5.C band is working in star topology (hub & spoke)& KU band is working in mesh topology.
And we have 40 sites which is connecting through cband over star topology & same 40 sites are also connecting tbrough k band over h topology................it is vsat conectivity .......so please provide me better solution
Hello guys, I am having issues testing connectivity from int f0/0 to my PC. First of all, I'd like to let you guys know that I am a somewhat a beginner when it comes to setting up a lab. I am learning how to do this because I am looking to get my CCN...
Hey guys. I got some help setting up my home lab and getting my 1841 fully online. Now, when I ping www.google.com, I get a perfect response when I do it from command prompt on my host plugged in to my router. But when I ping the exact same thing from wit...
In Ospf let suppose a new Route/Network is added on a Router that is DROTHER and also a Slave.Now this Network/change must be shared with DR that is Master.Problem is only Master can start communication while Slave cannot.So,how the Slave will share this ...