Luis Espejelis the Telecommunications Manager of IENova, an Oil & Gas company. Currently he works with Cisco IOS® and Cisco IOS XE platforms, and NX to some extent. He has also worked as a Senior Engineer with the Routing Protocols team in Cisco’s Global Technical Assistance Center (TAC), as a Network and Telecommunications Manager for GM’s Mexico subsidiary, and in the Engineering Department for Axtel, a major Internet Service Provider. Luis holds an Electronics and Communication degree and postgraduate degrees, one in marketing and one in telecommunications. He has several certifications such as Google Power Search, ITIL foundations, Certified Ethical hacker, CCNA in DC, Cybersecurity Specialist, and a CCIE in R&S (#52804) among others.
David Ramirezis a Network Engineer at Astra Zenca pharmaceutical, where he works on IWAN implementation projects and LAN refresh and migrations to 10 Gig Fibre ring network. Previously he worked as a Support Engineer for Cisco’s TAC Routing Protocols team, as a Deployment Engineer of Value Added Services (Voicemail and Multimedia Messaging Services for Mobile Telephony), and as a Telecom Associate Engineer at Getronics where he provided routing and switching support to several customers in the US and UK. David holds a Bachelor’s Degree in Electronics and Communication Engineering and diverse certifications such as ITIL Foundations, Microsoft Certified Professional, Cisco CCNA, and Cisco CCIE R&S-written only.
You can download the slides of the presentation in PDF format here. The related Ask The Expert sessions is available here. The complete recording of this live Webcast can be accessed here.
Layer 3 Multicast: Security and Best Practices
Q: It's the same configuration in IPv6?
A: Most of the commands are pretty similar, example for BSR. IPv6 pim [vrf vrf-name] bsr candidate rp ipv6-address [group-list access-list-name] [priority priority-value] [interval seconds] [scope scope-value] [bidir]
Q: Do you know how to harden multicast environment?
A: You can find the answer at the "Ask the expert" session of this event here
I want to know what is the best practice to design my Meraki and LAN/WAN network.I have a working network right now but I am trying to understand why it is like that and how can I improve it.Please see attached file. ThanksScene Mayer
Prezados, saudações!Venho por meio deste post esclarecer uma dúvida que me surgiu praticando um simulado do exame 100-105 da Cisco.Me deparei com a seguinte questão:"Qual informação é correta acerca da configuração default do Cisco Discovery Protocol?"Ini...
There are four command lines related to generating default routes and direct routes (Cisco7200 15.2(4) M11). I want to know the relationship, differences, and processing behavior of these command lines:1.ipv6 nd autoconfig prefix2.ipv6 nd autoconfig defau...
Prezados, saudações!Venho por meio deste post esclarecer uma dúvida que me surgiu praticando um simulado do exame 100-105 da Cisco.Me deparei com a seguinte questão:"O que um roteador irá fazer com um pacote que chegou e não possuí uma rede destino em sua...
We have voice traffic that we are identifying and marking using an ACL ip access-list extended voicepermit udp any range 16384 17683 any range 16384 17683 Then mark the traffic below with a DSCP of EFpolicy-map wan-outclass realtime-1set dscp ef...