(Live Webcast Thursday February 28, 2019 at 9 am Pacific/ 12 pm Eastern / 6 pm Paris)
This event had place on Thursday 28th, February 2019 at 9hrs PDT
In this event, Hall of Fame Member Peter Paluch and Cisco Designated VIP David Peñaloza talk about Enhanced Interior Gateway Routing Protocol (EIGRP) fundamentals. The session seeks to clarify the status and fundamentals of the EIGRP protocol. In addition, the experts discuss the common steps used to troubleshoot operations and common issues with EIGRP.
Review of EIGRP fundamentals
Recent advances and features in EIGRP
Troubleshooting tips and tricks
Peter Palúch is a Customer Support Engineer in the EMEA High-Touch Support CX team with a focus on Data Center Switching technologies. In his free time he indulges in all technologies, particularly routing protocols, routed technologies, and MPLS-based services. Before Peter joined Cisco, he worked as a university professor and a Networking Academy instructor and instructor trainer. Peter is an author of the Cisco Press title “CCIE Routing & Switching v5.0 Official Certification Guide, Volume 1”. He holds a CCIE certification on R&S #23527.
David Samuel Peñaloza Seijas works as a Senior Network Consulting Engineer at Verizon Enterprise Solutions in the Czech Republic. Previously, he worked as a Network Support Specialist in the IBM Client Innovation Center in the Czech Republic. David is an expert interested in all topics related to networks. However, he focuses mainly on data centers, enterprise networks, and network design, including software-defined networking (SDN). David has a long relationship with Cisco. He has been a Cisco Instructor for the Cisco Academy and was recognized as a Cisco Champion and aCisco Designated VIPfor 2017, 2018 and 2019. David holds a CCNP R&S, CCDP, CCNA Security, CCNA CyberOps and a CCNA SP certification.
Hello Everyone, I have installed Embedded Wireless on catalyst 9300 switch, now I am trying to register the Access point (Model numbers : 3702 and 1852i) but I am unable to do the same as it is registering for a minute and trying to download the EWLC...
Hi, We've just recieved a batch of 9200L and i'm going through the configuration. The configuration is setup and working well, I was just wondering if someone could assist with the user accounts part of the product. One our old swiches, we used to ru...
Hi Experts, i have switch with Model number is N9K-C9372TX-E & NXOS: version 7.0(3)I5(2). May i know the Command to implement the ethernet port speed limit to 25 Mbps on ingress to port or Egress out in the switch? thanks.
Hello. I thought with the things I have learned at this point, that I could simply figure out how to connect my 1841 to my ISP router and from there, be able to plug a host in to the one free fast ethernet port on my router and reach the web. But this has...