(Live Webcast Thursday February 28, 2019 at 9 am Pacific/ 12 pm Eastern / 6 pm Paris)
This event had place on Thursday 28th, February 2019 at 9hrs PDT
In this event, Hall of Fame Member Peter Paluch and Cisco Designated VIP David Peñaloza talk about Enhanced Interior Gateway Routing Protocol (EIGRP) fundamentals. The session seeks to clarify the status and fundamentals of the EIGRP protocol. In addition, the experts discuss the common steps used to troubleshoot operations and common issues with EIGRP.
Review of EIGRP fundamentals
Recent advances and features in EIGRP
Troubleshooting tips and tricks
Peter Palúch is a Customer Support Engineer in the EMEA High-Touch Support CX team with a focus on Data Center Switching technologies. In his free time he indulges in all technologies, particularly routing protocols, routed technologies, and MPLS-based services. Before Peter joined Cisco, he worked as a university professor and a Networking Academy instructor and instructor trainer. Peter is an author of the Cisco Press title “CCIE Routing & Switching v5.0 Official Certification Guide, Volume 1”. He holds a CCIE certification on R&S #23527.
David Samuel Peñaloza Seijas works as a Senior Network Consulting Engineer at Verizon Enterprise Solutions in the Czech Republic. Previously, he worked as a Network Support Specialist in the IBM Client Innovation Center in the Czech Republic. David is an expert interested in all topics related to networks. However, he focuses mainly on data centers, enterprise networks, and network design, including software-defined networking (SDN). David has a long relationship with Cisco. He has been a Cisco Instructor for the Cisco Academy and was recognized as a Cisco Champion and aCisco Designated VIPfor 2017, 2018 and 2019. David holds a CCNP R&S, CCDP, CCNA Security, CCNA CyberOps and a CCNA SP certification.
I have bundled three ethernet ports of my ASA 5520 into a port channel. I have then created subinterfaces for internal VLANs. All that works fine no issues. My ISP assigns me an IP address with DHCP. Currently, I have a physical ethernet port on the ...
I have two questions the first is: After a port has became a trunk port is there any way to see if that port was originally set to dynamic desirable, dynamic auto, or just trunk? I am using the sh spanning-tree detail command to identify trunk p...
I'm trying to limit bandwidth for certain users on a Cisco ASDM 6.4 Firewall. I've tried creating inside and outside policy rules but i'm still struggling to see results. Any advice or tips as to how to do this?
I have an issues with using the loopback as source for syslog packets.The second the loopback is used logs are not making iy anymore to the syslog server. Everything works using the Gig interface.The syslog server can reach the loopback and the router can...