cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

WS-C2960G-24TC-L speed problem

117
Views
0
Helpful
0
Comments

Hi there

We have a wierd problem with our Catalyst 2960 switch.

The switch is connected to a 4510 switch at our provider via a 1000BASE-BS-D module. At the provider end and in the 2960 sh int says 1000 full duplex.

We havent done any settings on the port.

When we do a test internally on the switch we can create a throughput at 120/120 Megabyte a second which means full duplex and everything is fine.

When we go through our ISP we can have exactly 120 Megabyte a second in total. It looks like half duplex but link says full 1000.

Any suggestions

Regars

Carsten