To participate in this event, please use the button to ask your questions
This topic is a chance to clarify your questions about Cisco’s SD-WAN technical terms such as Transport Locators (TLOCs) and routes, and the best practices to benefit from the full power of Cisco SD-WAN by leveraging policies. The session will address questions such as; How do you stitch together Multiprotocol Label Switching (MPLS) and Internet-only branches? How do you prefer one Data Center (DC) over another? How do you build hub and spoke topologies? What are the trade-offs in the implementation? And What is the difference between a centralized and a localized policy?
Ask questions from Friday, March 20 to Friday, April 3, 2020
Daniel Dib is a Senior Network Architect at Conscia. He works with creating scalable, modular, and highly available network designs that meet business needs. He started out his career in the implementation and operations field. Daniel obtained his CCIE certification in 2012 and in May 2016 he became the second person in Sweden to get CCDE certified. Daniel has been recognized as a Cisco Designated VIP by the Cisco Learning Network. He often acts as a subject matter expert for his customers with deep expertise in routing, switching, multicast, and fast convergence. Daniel holds a CCIE Enterprise (#37149) and a CCDE (#20160011).
David Samuel Peñaloza Seijas works as a Senior Network Consulting Engineer at Verizon Enterprise Solutions in the Czech Republic. Previously, he worked as a Network Support Specialist in the IBM Client Innovation Center in the Czech Republic. David is an expert interested in all topics related to networks. However, he focuses mainly on data centers, enterprise networks, and network design, including software-defined networking (SDN). David has a long relationship with Cisco. He has been a Cisco Instructor for the Cisco Academy and was recognized as a Cisco Champion and aCisco Designated VIPfor 2017, 2018, 2019 and 2020. David holds CCNP R&S, CCDP, CCNA Security, CCNA CyberOps, and CCNA SP certification. Currently, he is pursing a CCDE.
Daniel & David might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the SD-WAN category.
hi i am trying to work on my project on gns3 I do everything right but i can't see the OSPF neighbors relationship between my router and Layer 3 switch Topology and configuration as follows Router 1 connects to L3S on interface Eth1/0...
Hi im new with this networking thing and really need help on how to sort out the problem with our network setupwe have this two devices and been using for more than 10 years without problemCisco 1841 Router (under vlan 50 - 10.130.50.4)Cisco Catalyst...
Hi All! Hope you guys are well. We have 6509-E with SUP720-3B. The supervisor engine has one Ethernet port.It also has Card Type: WS-X6548-GE-45AF.My question is what is the purpose of Ethernet port on Supervisor Engine, Is it uplink etc? In fac...
Hi Guys, I am trying to configure vxlan configuration on the GNS3 and found out issues between the ASA and Nexus.I noticed that this flapping only occur when I introduced the nve interface into the configuration on Nexus.Prior to this (configuration ...