Based from the Deep-Dive series webcast, Cisco Expert Vishal Mehta will be available for an Ask the Expert discussion focused on the advantages of Nexus 1000v Solution across spectrum of technologies and how it can be leveraged to enhance your Data Center Virtual Infrastructure to meet the next-generation goals.
Ask your Questions from February 12 through March 4, 2015
Vishal Mehta is a Technical Marketing Engineer with Cisco's Data Center Competitive Insights Team based in San Jose, California. Previously he was working as the customer support engineer for Cisco’s Data Center Server Virtualization Technical Assistance Center (TAC) team for the past 3 years with a primary focus on data center technologies such as Cisco Nexus® 5000, Cisco UCS, Cisco Nexus 1000V, and virtualization. He presented at Cisco Live in Orlando 2013, Milan 2014, and San Francisco 2014 (BRKCOM-3003, BRKDCT-3444, and LABDCT-2333). He holds a master’s degree from Rutgers University in Electrical and Computer Engineering and has CCIE® certification (# 37139) in Routing/Switching, Service Provider & Data Center
About the Topic
Cisco Nexus 1000V Series Switches provide a comprehensive and extensible architectural platform for virtual machine (VM) and cloud networking. The switches are designed to accelerate server virtualization and multitenant cloud deployments in a secure and operationally transparent manner.
From single hypervisor to now a multi-hypervisor virtual networking solution, Cisco Nexus 1000v has come a long way since its launch few years back. Currently 1000v product-line provides complete solution ranging from Switching, Routing, Firewall, Load-balancing to Cloud-Infrastructure.
HI Guys, i am wondering, i have CCNP Routing and switching, now it has been moved to CCNP enterprise as per cisco migration tool with some specialist certs. In migration tool i saying you should receive those certificates, i have not...
Hello Cisco community
Purchased single Catalyst Switch C3750G-WS24-S25 with integrated wireless controller. Had to do password reset, and by mistake deleted some files and folders from flash: while being in rommon mode. Also wanted to shorten boot ...
Hi,I've got below topology with RTA internally peered with RR1 and RR2 as client. RR1 and RR2 are normal iBGP peers.I can see from RR1 the prefix received from RTA is as per below with RR1# show ip bgp ipv4 unicast nei 220.127.116.11 received-routesNe...
Hi alli know that switches have igmp enabled by default, what happens to multicast traffic when this is the case? Is it flooded to all ports or not?what happens in the case of no pim router on querier? Do they drop or forward still ?cheers
often we are receiving the STP change logs from the L2 switch and we could see flap in uplinks. We are getting log below. %SFF8472-3-THRESHOLD_VIOLATION: Gi1/1/1: Rx power low warning; Operating value: -18.2 dBm, Threshold value: -...