This session provides an opportunity to learn how to troubleshoot Hardware failures on Nexus 7000 series switches. It also enables customers to discuss various common hardware and architecture issues and solution explanation.
To participate in this event, please use the button to ask your questions
Ask questions from Monday, July 11 to Friday July 22nd, 2016
Chandan Sarkar is a customer support engineer in High-Touch Technical Services (HTTS). He has over 9 years of experience in the industry working with large enterprises and telecom networks. His areas of expertise include Cisco Catalyst 2000, 3000, 4000, 6500, and Cisco Nexus 7000,Nexus 5000, Nexus 3000, Nexus 2000, UCS, and MDS SAN Switches. Sarkar holds several certifications including CCNP, VPC and other expert level certifications from Citrix, Extreme Networks, Nortel ERS, and Infoblox. He is currently working to obtain a CCIE in Data Center. He graduated with a MS degree on Systems Engineerin from Birla Institute Technology Science (BITS Pilani)
Partha Dasgupta is a customer support engineer in High-Touch Technical Services (HTTS). He has more than 14 years of experience in the industry working with large enterprises and telecom networks. His areas of expertise include Cisco Catalyst 2000, 3000, 4000, 6500, and Cisco Nexus 7000,Nexus 5000, Nexus 3000, Nexus 2000, UCS, and MDS SAN Switches. Partha holds several certifications including CCIE Data Center (53255) and other Expert level certifications from Novell CNE, ITILv4.
Chandan and Partha might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the LAN Switching and Routing Community
Dear all,Now I have been investigating whether Cat65-MSFC can configureNetFlow NAT record or not. For instance other vendor such as FortiGate can support so I think Cisco might support for this.https://docs.fortinet.com/document/fortigate/6.0.6/handb...
Hello, I have to change a Cisco 3845 and install a Cisco ISR 4451. The problem is I have a subinterface with 30 helper-address: When I insert more than 16 directions using helper-address command, I have an error message which says that the router does not...
I have some closet with relatively old 6509s that I am trying to configure for 802.1x and MAB. For my test case, I am using a Cisco AP which is getting profiled from ISE and added to the MAB group. ISE shows the authentication passing and return...
Hello Not a technical question, please remove if not allowed. Looking to purchase Cisco Switches and a router for home lab and Cisco Cert. Does anyone sell Cisco Retail? I have a local Micro Center in Maryland and Virginia with a lim...