This topic is a chance to discuss more about the most common issues within the different Catalyst 9000 models and the best practices to troubleshoot them. The session includes tips and best practices on how to react when an issue appears, what information should be collected, and what actions should be taken to recover from such scenarios.
Ask questions from Tuesday 25 to Friday 28th of June, 2019
Adan Acosta is a Technical Consulting Engineer on the Enterprise Routing & Switching team at the Customer Experience (CX) Center. He has worked in different areas related to network design for seven years, such as pre-sales, post sales, and technical support on Wireless, Routing & Switching, and Security technologies. Adan holds a bachelor’s degree in electronics and communication from the ESIME Zacatenco in Mexico. He holds a CCNA in R&S and Security.
Aaron Cespedes is a Technical Consulting Engineer on the Enterprise Routing & Switching team at the Customer Experience (CX) Center. He has worked with different Cisco technologies for six years, including backbone, and specializes in Switching technologies. Aaron holds a bachelor’s degree in telecommunications from the Universidad Politecnica of Costa Rica. He holds a CCNP and a CCNP in R&S certifications. He is currently pursuing a CCIE in R&S.
Adan & Aaron might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the Switching category.
I'm planning to update an ASR 9001 from version 5.3.4 to 6.5.3 with SP3 - is it possible to do this in a single reload? I mean, "install add" the 6.5.3 and 6.5.3-sp3 then "install activate disk0:*6.5.3*"...Thank you.
We have created a Mirror (Span) port on our Core switch in order to see all traffic on the network, however, we are actually only seeing very little traffic. I would say only about 10-15 percent of the network devices and traffic. There are rough, 50 edge...
Hi AllI am currently looking at the costs of our Global MPLS and benefits we get from it.Has anyone moved from MPLS to Internet only ? If so how do you find it? Also, with regards to global MPLS, what carriers do people recommend these days?
I am using one Cisco SG300. I am trying to simulate two unmanaged switches in the cisco managed switch using VLANs.Port 3 - VLAN 2 - AccessPort 4 - VLAN 2 - AccessPort 5 - VLAN 3 - AccessGlobal STP - DisabledI am trying to test STP of another device. For ...