To participate in this event, please use the button to ask your questions
This topic is a chance to discuss more about Enhanced Interior Gateway Routing Protocol (EIGRP) fundamentals. The session seeks to clarify the status and fundamentals of the EIGRP protocol. In addition, the experts will discuss the common steps used to troubleshoot operations and common issues with EIGRP.
To participate in this event, please use thebutton belowto ask your questions
Ask questions from Thursday February 28th to Friday 8th of March, 2019
Peter Palúch is a Customer Support Engineer in the EMEA High-Touch Support CX team with a focus on Data Center Switching technologies. In his free time he indulges in all technologies, particularly routing protocols, routed technologies, and MPLS-based services. Before Peter joined Cisco, he worked as a university professor and a Networking Academy instructor and instructor trainer. Peter is an author of the Cisco Press title “CCIE Routing & Switching v5.0 Official Certification Guide, Volume 1”. He holds a CCIE certification on R&S #23527.
David Samuel Peñaloza Seijas works as a Senior Network Consulting Engineer at Verizon Enterprise Solutions in the Czech Republic. Previously, he worked as a Network Support Specialist in the IBM Client Innovation Center in the Czech Republic. David is an expert interested in all topics related to networks. However, he focuses mainly on data centers, enterprise networks, and network design, including software-defined networking (SDN). David has a long relationship with Cisco. He has been a Cisco Instructor for the Cisco Academy and was recognized as a Cisco Champion and aCisco Designated VIPfor 2017, 2018 and 2019. David holds a CCNP R&S, CCDP, CCNA Security, CCNA CyberOps and a CCNA SP certification.
Peter and David might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the Networking community.
Hello,i have problems connecting my DNA Center Version 188.8.131.52 to my WLC 9800 Version 17.3.3.I configured Netconf Port 830 in the WLC and added the Port 830 in the DNA discovery.I also checked via ssh if the port 830 is accessible. It worked.&nb...
I have a requirement to implement routing among 3 locations as shown in the following diagram. Location A.B & C are in a unique subnet in default vlan1. I cannot make any changes on these networks (A, B & C) because it's not under my control. Now ...
I wanted to check how much power our new Catalyst 9407 is consuming. The switch is configured and running.There is only one Access Point connected. No other clients. #sh power
Power Fan State...
I'm currently working on a HLD for 3-site SDA design and need advice on L2 Handoff please.Can multiple VLANs be configured at the same Border or is it single VLAN support only? Appears to be no documentation anywhere that references multiple VLAN designs....
Here are some commonly asked questions and answers to help with your adoption of Cisco SD-Access. Subscribe to this post to stay up-to-date with the latest Q&A and recommended Ask the Experts (ATXs) sessions to attend.
I have implemented SDA...