This topic is a chance to discuss more about the OSPF configuration and the best practices to deploy and operate the protocol. The session will cover topics related to IOS, IOS-XE and NXOS and will focus on providing better understanding about the differences of implementing OSPF in different platforms. Participate on this event and solve all your questions regards this routing protocol, the expert will provide advice and best practices to identify and solve OSPF issues.
Ask questions from Monday 8th to Friday 19th of January, 2018
Erasmo Maldonadois a Customer Support Engineer at Cisco’s TAC Routing Protocols team, he has been there sin March 2014. He has over 7 years of experience in routing and currently holds the role of Team leader within his team. . His Expertise covers IGPs on IOS and NXOS, BGP, Multicast, MPLS, L2VPN and MVPN. Erasmo holds an Electronic and Communication Engineering Degree from Universidad de las Americas at Puebla, Mexico. He has a CCIE Certification in Routing & Switching (#54347).
Erasmo might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the Contact Center Community
Hi allI've a core switch composed from two Cisco6509-E with rel.12.2(33)SXH8I need to do a Dual-Active detection modeI can't use the Dual-Active Fast hello because the core's release is too old.So I would like to use the distrubution switches connected to...
Hi all I should trust DSCP and CoS on SW 2960x version 15.2 in stackwise for all traffic coming from and to the Access Points, I have a WLC working in Local mode, unfortunatelly I don't I don't know QoS that well especially in wireless deployme...
Hi, Requesting assistance regarding issue with overlapping subnetsI have two existing sites (Site A & B) and acquired an additional site (Site C)The issue is that Site C is overlapping with my existing Site B, both have the same subnet 192.168.2....