To participate in this event, please use the button to ask your questions
This topic is a chance to discuss more about SD-WAN), it's foundations and inner mechanisms as well as its correct design and implementation to achieve desired business outcomes. Software-Defined WAN (SD-WAN), is a popular technology and this event is aimed to help engineers/customers/partners understand the benefits and possible advantages that its implementation can bring.
Ask questions from Monday 19th to Friday 30th of August, 2019
David Samuel Peñaloza Seijas works as a Senior Network Consulting Engineer at Verizon Enterprise Solutions in the Czech Republic. Previously, he worked as a Network Support Specialist in the IBM Client Innovation Center in the Czech Republic. David is an expert interested in all topics related to networks. However, he focuses mainly on data centers, enterprise networks, and network design, including software-defined networking (SDN). David has a long relationship with Cisco. He has been a Cisco Instructor for the Cisco Academy and was recognized as a Cisco Champion and a Cisco Designated VIP for 2017, 2018 and 2019. David holds a CCNP R&S, CCDP, CCNA Security, CCNA CyberOps and a CCNA SP certification. Currently, he is preparing for a CCDE.
David might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the SD-WAN community.
What design is generally recommended for an office with approx 400 client devices. We have about 10 x access L2 switches (2960x) and are not sure whether to go with 1 x L3 stack (4 x 9300 switches) or maybe 2 x stacks (of 2 x 9300 switches). We are thinki...
After I create a VLAN i can no longer access the GUI.port 1 - trunk connected to routerport 2 - access, PCThe switch is connected to an Edgerouter.I'm sure it's something simple, but I'm new to VLANs and can't figure it out.
Hi Folks, I have posted my config below for a little advice/suggestions.This is 1 of 2 Cisco 887 routers which feed into a Cisco 2960 switch were I have mapped the access ports to VLANs as below. I have a few questions as I had planned to use Ether C...
Hello all. Some of my friends telling me that I am using stateless method for my Dhcp router and some of them telling me that I am using stateful method. I attached the packet tracer for references.This is the current configuration: A...
Hi Everyone, I want the centre administration & tutor computer to not be able to access the internet but can access web and file server. I have tried this coding but it doesn't work. access-list Filter1deny tcp host 2001:AAAA:BBBB...