This topic is a chance to discuss more abouthow Virtual Extensible LAN (VXLAN) / VXLAN Ethernet Virtual Private Network (EVPN) works. It covers the best practices to configure, deploy and troubleshoot a Border Gateway Protocol (BGP) EVPN fabric BGP EVPN deployment and manageability can be much simpler with adequate preparation and following documented guidance. The Cisco Nexus 9000 and many other Nexus platforms has the capability to deploy VXLAN fabric with BGP EVPN.
Ask questions from Monday 14th to Friday 25th of January, 2019
Rurick Kellermannis a Team Leader of the Data Center Routing & Switching team at Cisco’s TAC in USA. He has over 20 years of experience working in the IT filed, de specializes on Routing & Switching, Services Provider (MPLS), Multicast and VXLAN technologies. Rurick holds a Bachelor’s degree in Electrical Engineering from the Universidad Autonoma de Centro America in Costa Rica.
Abayomi Adefilais a Technical Leader in the Cisco Routing Protocol technology space and is part of a team of leaders that handles escalation engagements on all routing protocols, VXLAN (EVPN), Multicast and related subjects. He has been working in the telecommunication and networking industry for the past 18+ years, with the most recent almost 9 years with Cisco. He holds a Master’s degree in Advanced Computer Networking from Glasgow Caledonian University, Scotland. Abayomi holds two CCIE certifications, one in Routing & Switching and one in Service Provider (#25926) among other industry certifications.
Rurick and Abayomi might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the Switching community.
Hello, friends!As I understand on nexus 6000 we can not configure DHCP pool/DHCP server (like on catalyst switches) and can configure only dhcp relay? I mean on nexus we cannot configure DHCP server? Do we must install s...
Hi, I tried search for Route_1 & Route_2 in sh run but there is none.Where can i find IP for Route_1 & Route_2? Ping Route_1 & Route_2 also cant. ip route 0.0.0.0 0.0.0.0 Vlan10 172.30.219.81 name Route_...
I would like to manage all of our hardware in our system including historians. However we struggle to find out the cisco versioning. How does cisco manages the versions of the hardware? We are only interested in major ch...
Hi; I've configured Xconnect over MPLS Cloud between 2 sites Xconnect is showing up but there is no reach-ability between the 2 sites from LAN your help R1 (ISR 4321)pseudowire-class R1encapsulation l2tpv3ip local interface Loopback100inter...