This topic is a chance to discuss more about how to upgrade the IOS version on Cisco Catalyst Switches Series 2960, 3560 and 3750. Learn more about why it is recommended to regularly upgrade the IOS of the Cisco appliances and how it is possible to do it right since the first time. Ask about different methods and best practices to upgrade IOS on Cisco Catalyst Switches.
To participate in this event, please use the button to ask your questions
Ask questions from Monday, November 15 to November 23rd, 2016
Leo Laohoois a network engineer for. Leo specializes in wireless and LAN/WAN technologies. He previously worked with EDS (today HP) and SITA/Equant, he holds a Colleague Degree in Business Management and a CCNA.
On his free time, Leo enjoys participating in the Cisco Support Community, he states that it is a “TWO-way street”. He is one of the topCisco Designated VIPs and a member of the elite Cisco Support Community Hall of Fame program. The Cisco Support Community is a place where you can help someone else and at the same time learn from other people’s responses their responses to you answers.
Leo might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the Contact CenterCommunity
Something very strange started happening. I'm looking for a sanity check. We currently use a Radius-As-A-Service to provide authentication for our VPN on a Cisco ASA and ASDM access to that same ASA. Nothing changed on the radius side at all.&nb...
We see this issue quite often, we're staging an MSTP deployment of an NCS2006 M6 with dual TNC-Es, and we constantly lose connection to the shelf in CTC, making it difficult to setup some initial configuration parameters. This issue occurs on multiple she...
Hi, I want to make a PBR with asa 5520 with ios 9.1.x, but I can not put the set ip next-hop command Configuration aclaccess-list acl-pbr-dmz extended permit ip host 184.108.40.206 anyPbr configuration route-map pbr-dmz permit 10match ip addr...
We bought Anyconnect license but when we contact licensing team to help us, a person said to us Anyconnect License doesn't work on our system (see above pls) but Another person in licensing team said to us it will work, which is true, we are very co...
Hello Folks,How we decide which protocol belong to which layer ?My understanding is , it depend on the protocol filed in case of IP(Protocol: ICMP(1) ) and Type field in case of Ethernet.So lets say if IP Protocol:ICMP(1) then it is encapsulated ins...