THREE PART SERIES This Deep-Dive series is focused on the advantages of Nexus 1000v Solution across spectrum of technologies and how it can be leveraged to enhance your Data Center Virtual Infrastructure to meet the next-generation goals.
Cisco Nexus 1000V Series Switches provide a comprehensive and extensible architectural platform for virtual machine (VM) and cloud networking. The switches are designed to accelerate server virtualization and multitenant cloud deployments in a secure and operationally transparent manner.
From single hypervisor to now a multi-hypervisor virtual networking solution, Cisco Nexus 1000v has come a long way since its launch few years back. Currently 1000v product-line provides complete solution ranging from Switching, Routing, Firewall, Load-balancing to Cloud-Infrastructure.
Vishal Mehta is a Technical Marketing Engineer with Cisco's Data Center Competitive Insights Team based in San Jose, California. Previously he was working as the customer support engineer for Cisco’s Data Center Server Virtualization Technical Assistance Center (TAC) team for the past 3 years with a primary focus on data center technologies such as Cisco Nexus® 5000, Cisco UCS, Cisco Nexus 1000V, and virtualization. He presented at Cisco Live in Orlando 2013, Milan 2014, and San Francisco 2014 (BRKCOM-3003, BRKDCT-3444, and LABDCT-2333). He holds a master’s degree from Rutgers University in Electrical and Computer Engineering and has CCIE® certification (# 37139) in Routing/Switching, Service Provider & Data Center
Ask your Questions in the Discussion forums from February 12 through March 4, 2015
searching out comments from oldsters who have examined or are walking cisco well matched 100gbe optics in some of the newer product including the nexus 93180yc-ex and catalyst c9500-48y4c. use of one and 10gbe 1/3 birthday party optics appears to be fairl...
hello guysi recently recruitment in startup company as network eng. we have a conferencing platform that rent it as a SaaS to customer. now the company what to grow up. and i need a prespective of how service provider network should be ? we...
I have a WS-C2960X-48LPD-L with two 1 GB uplinks/downlinks conected to Cisco two 4500 backbone devices. Recently we installed Om3 fiber over all building and we tried to install SFP-10G-SR modules on the tengigabit ports. One of them (1/0/1) works t...
I searched and couldn't find definitive steps/answer:My 4507 is showing a faulty supervisor:Chassis Type : WS-C4507R
Power consumed by backplane : 40 Watts
Mod Ports Card Type Model Serial No.