During the live event, Cisco subject matter expert Vaibhav Katkade will cover the various security features available on Cisco Catalyst switching platforms and how they can be used to block internal threats in enterprise networks.
Register today for this Cisco Support Community live webcast.
Please join us on Tuesday, April 1, 2014 at 9 a.m. PDT San Francisco (UTC -7 hours) for this live, interactive event. This corresponds to noon EDT New York (UTC -4 hours), 5 p.m. London (BST UTC +1), or 6 p.m. Paris (CEST UTC +2).
Cisco Catalyst switching overview
First hop security: IPv4
First hop security: IPv6
Identity-based networking with 802.1X
Threat defense with flexible NetFlow
Vaibhav Katkade is a product manager in Cisco's Enterprise Networking Group covering Cisco TrustSec and identity-based solutions on the Cisco Catalyst switching and ISR/ASR series routers. Prior to this, he was a software engineer on the Cisco Catalyst 4500 Series switching team, with experience on Layer 2 protocols, Layer 3 forwarding, Power over Ethernet, and system management. He has also worked as a software engineer at a WAN optimization startup, working on data deduplication algorithms. He has his master’s degree in electrical engineering from the University of Southern California (USC).
Hi, I am looking at a Cisco managed switch to do the following:- have 3 or 4 VLANs: private, office, guest and optionally shared (that could go in private and be shared via ACL rules)- Each VLAN in a different subnet- private VLAN: PC to manage all V...
Hello Cisco community, I have an odd and seemingly frustrating problem...I have a set of switches/devices - Catalyst 3750 an 2960 plus a RV325The RV325 is the gateway to the internet using the primary ISPThere is a second ISP which is there for ...
I'm having problem with the trunk to trunk. My setup is as follows.. switch6a---->switch6b---->router6a---->router6b---->switch6c---->switch6d- Management VLAN 192.168.99.X 255.255.255.248 for all devices-switch6a also has a seri...
Hello AllI have a task in hand, where by i need to get Site to Site and Remote to site configure in my Branch RouterHQ- Only Site to Site VPN to Branch RouterBranch- Site to Site VPN with HQ router and Client to Branch Site VPN AccessI have following conf...
I'm trying to setup my new home network with some cisco devices. I am new with configuration of business network devices, but I want to learn to work with them get more of this devices in my home. But I have basic problems with my Cisco C1111-8P since mor...