(Live Webcast Tuesday December 11, 2018 at 10 am Pacific/ 1 pm Eastern / 7 pm Paris)
This event had place on Tuesday 11th, December 2018 at 10hrs PDT
In this event, you can learn more about the best network design practices. The session intends to introduce the attendees to network design, its roots and principles, and the mindset needed to be a successful designer and a holistic network architect. When it comes to network design, a solution is considered successful if it meets business requirements through technology implementation. Network designers are the bridge between technical and business domains. In this role, they must understand the business goals and be able to translate them into requirements that drive the technical implementation.
Network design principles
Network design mindset
Place all together, with examples and scenarios
David Samuel Peñaloza Seijas works as a Senior Network Consulting Engineer at Verizon Enterprise Solutions in the Czech Republic. Previously, he worked as a Network Support Specialist in the IBM Client Innovation Center in the Czech Republic. David is an expert interested in all topics related to networks. However, he focuses mainly on data centers, enterprise networks, and network design, including software-defined networking (SDN). David has a long relationship with Cisco. He has been a Cisco Instructor for the Cisco Academy and was recognized as a Cisco Champion and aCisco Designated VIPfor 2017 and 2018. David holds a CCNP R&S, CCDP, CCNA Security, CCNA CyberOps and a CCNA SP certification. Currently, he is preparing for a CCDE.
On Cisco 3850 switches, when configuring a port for Cisco IP phone, the built-in Auto-QoS is used. It's composed of service policies for input: AutoQos-4.0-Cisco-Phone-Input-Policy and for output: AutoQos-4.0-Output-Policy. So, when we wan...
I got the problem when deploying 2 vEdge at HQ Site with VRRP and 1 vEdge at Branch site, Everything can work via SD-WAN tunnel except some application etc. SAP cannot work. I tried to down 1 vEdge (VRRP Standby) at HQ Site. The result shows tha...
Hi all C3850# sho processes cpu sortedCPU utilization for five seconds: 95%/39%; one minute: 95%; five minutes: 94%PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process140 4086466 627425 6513 43.00% 47.00% 46.65% 0 NGWC L2M233 87104868 126847578 6...
I've set Stackwise Virtual with different priority value(each 15 and 14) for aiming to keep one switch always-be active.
The switch that I set priority 15 didn't become active when I later turned it on after first booting the switch with priority...