Webcast Layer 3 Multicast: Security and Best Practices
(Live Webcast Tuesday November 28, 2017 at 11 am Pacific/ 2 pm Eastern / 7 pm Paris)
In this event, you will learn more about Layer 3 multicast and the best practices to identify possible threats and take security measures. The session provides an overview of basic multicast, the best security practices for use of this technology, and recommendations for how to configure an auto rendezvous point (RP) and Bootstrap (BSR) in multicast protocols, with particular focus on RP distribution methods. This event includes a live demonstration of Layer 3 multicast technology.
Agenda • Introduction • Multicast basics • Auto RP, BSR (RP distribution methods) • Possible threats and security measures • Demonstration
Luis Espejel is the Telecommunications Manager of IENova, an Oil & Gas company. Currently he works with Cisco IOS® and Cisco IOS XE platforms, and NX to some extent. He has also worked as a Senior Engineer with the Routing Protocols team in Cisco’s Global Technical Assistance Center (TAC), as a Network and Telecommunications Manager for GM’s Mexico subsidiary, and in the Engineering Department for Axtel, a major Internet Service Provider. Luis holds an Electronics and Communication degree and postgraduate degrees, one in marketing and one in telecommunications. He has several certifications such as Google Power Search, ITIL foundations, Certified Ethical hacker, CCNA in DC, Cybersecurity Specialist, and a CCIE in R&S (#52804) among others.
David Ramirez is a Network Engineer at Astra Zenca pharmaceutical, where he works on IWAN implementation projects and LAN refresh and migrations to 10 Gig Fibre ring network. Previously he worked as a Support Engineer for Cisco’s TAC Routing Protocols team, as a Deployment Engineer of Value Added Services (Voicemail and Multimedia Messaging Services for Mobile Telephony), and as a Telecom Associate Engineer at Getronics where he provided routing and switching support to several customers in the US and UK. David holds a Bachelor’s Degree in Electronics and Communication Engineering and diverse certifications such as ITIL Foundations, Microsoft Certified Professional, Cisco CCNA, and Cisco CCIE R&S-written only.
We look forward to your participation. Please Share this event in your social channels.
Are you a Cisco customer or partner and have a technical question? Get answers before opening a TAC case by visiting the Cisco Support Community.
I want to block some ip on my network, this IP are primary IP in my Network (Some Devices has a default IP's i have many vendor devices that has same IP binded i want to Block on my network) One Devices is connected on FA2/5 (IE 115 Switch...
Dear Team, I have setup as per attached diagram. I have two sites that is SITE-1 and SITE-2. The SW1 is Layer switch installed at my SITE-1 and SW2 is the layer 2 switch installed at my SITE-2. I want to configure the fail-over at Layer 2 so that traffic ...
Hello,we have been using cisco sg250-26 for couple of months now. We have just bought another SG250-26 Switch for high-availability. I was told that there are 2 possible ways to achive high-abailability: hot standby and cold-standby..Do you guys have a ma...
Hi All, I'm planning to use a ASR 1009-X router with 40Gbit connections (80Gbit throughput) and I would like to know whether any performance licenses are needed?Also do you know any documentation regarding the Cisco licensing? What kind of possible l...
Hi!Today I faced with unexpected stack link lost between members of stack. Now stack in consistent stHow troubleshoot such problem?Also I found strange why switch #1 restarted (as log shows, see futher) while link lost between #2 and #3? c3850 ...