cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2540
Views
0
Helpful
0
Comments
SunilKhanna
Level 1
Level 1

 

Configuring OSPF

Open shortest path first (OSPF) is an IGP developed by the OSPF working group of the Internet Engineering Task Force (IETF).This is test.

OSPF Configuration Task List

OSPF typically requires coordination among many internal routers, area border routers (routers connected to multiple areas), and autonomous system boundary routers. At a minimum, OSPF-based routers or access servers can be configured with all default parameter values, no authentication, and interfaces assigned to areas.

 

Ø       Enable OSPF

router ospf process-id

network address wildcard-mask area area-id

Ø       Configure OSPF Interface Parameters

ip ospf cost cost

ip ospf retransmit-interval seconds

Ø       Configure OSPF Network Type

ip ospf network {broadcast | non-broadcast | {point-to-multipoint [non-broadcast] }}

 

 

 

 

pic1.bmp

 

http://www.wl0.org/~sjmudd/wireless/network-structure/english/html/figures/ospf.png

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: