in My Videos) During the live event, Cisco subject matter experts
Richard Michael and Somu Jayaraman focused on troubleshooting switching
issues with the Cisco Catalyst 6500 and the architecture of the latest
hardware in the Cisco Catalyst 6500 fami...
in My Videos)Souvik Ghosh is a CSE at the Cisco TAC in Bangalore, India.
He has 3.5 years of experience in LAN switching technologies. LAN
switching products such as the Cisco Catalyst 6k,4k,2k Series Switches
are his areas of expertise. He has been...
Hello. I need help if the EEM doesn't work because of a switch platform or EEM configuration.I configured EEM on the switch as follows:Swtich # show run!process cpu threshold type total rising 90 interval 5 switch 1!event manager applet CPU_Monitorev...
've deployed 4- 9300's in two stacks. All 4 switches areC9300-48P Ver 16.9.2Stack 1: SW2- SW3 (no issues)Stack 2: SW4- SW5 (VoIP POE issues)The second stack of two has number of Cisco VoIP phones that will not negotiate for power (about 10). wh...
Hello, I have to migrate from 2 swithces multilayer to 1, each switch has a different configuration and you have the following SVISW1Vlan100 interface description << VLAN WAN INTERNET >> ip address 22.214.171.124 255.255.255.24...
We recently upgraded our internet services from 100MB to 500MB. We manage the router for this connection and currently have a Cisco 2911 router for connectivity and we are unable to get more than 160MB throughput. We are wondering if we can get more out o...