Join us Thursday, September 5 at 10 am PT as our expert panel led by
Raakhee Mistry, Director of Enterprise Product Marketing at Cisco, dives
into WiFi 6, 5G, and Open Roaming. As always, we'll be answering your
questions live on air, so post them in the ...
Join us live on Wednesday, May 15 at 10 am PT as we deep-dive into the
newly introduced Catalyst 9100 Access Point and Catalyst 9600 Switch.
This is the gear that will deliver the promise of WiFi 6! Post your
Dear all, As for attached image, I have to force traffic to a shaper node that working like bridge. I have also to put in place an OSPF session to redistribute routes from RTR-01 to RTR-03. From your point of view, is it a good idea ?...
Hi We have installed the GPRS card and Vodafone 2G SIM Card in the router. We have done the GPRS configuration but GPRS is not coming up. Details are mentioned below PID: CISCO1921/K9 PID: HWIC-3G-GSM IB_1616_KNL_IMT_MANESAR#sh cellular 0/10 /0 al...
Hi Tech Guys, Could you share some guide about calaculation Oversubscription ratio between Access to Distribution and Distribution to Core,For example for Cisco 9400 per slot capacity is 80Gbps and and how can we use 24 Port 10G Moudule which i...
good day. ISR 4351/K9 IOS 16.09.04 i need to make "ip nat inside source static" for range 5100-5200 tcp ports. i have find code, like next: ip access-list extended 190permit tcp host 192.168.0.10 range 5100 5200 any!route-map MAP_RST permit 10m...