This Deep-Dive series is focused on the advantages of Nexus 1000v Solution across spectrum of technologies and how it can be leveraged to enhance your Data Center Virtual Infrastructure to meet the next-generation goals.
Cisco Nexus 1000V Series Switches provide a comprehensive and extensible architectural platform for virtual machine (VM) and cloud networking. The switches are designed to accelerate server virtualization and multitenant cloud deployments in a secure and operationally transparent manner.
From single hypervisor to now a multi-hypervisor virtual networking solution, Cisco Nexus 1000v has come a long way since its launch few years back. Currently 1000v product-line provides complete solution ranging from Switching, Routing, Firewall, Load-balancing to Cloud-Infrastructure.
Vishal Mehta is a Technical Marketing Engineer with Cisco's Data Center Competitive Insights Team based in San Jose, California. Previously he was working as the customer support engineer for Cisco’s Data Center Server Virtualization Technical Assistance Center (TAC) team for the past 3 years with a primary focus on data center technologies such as Cisco Nexus® 5000, Cisco UCS, Cisco Nexus 1000V, and virtualization. He presented at Cisco Live in Orlando 2013, Milan 2014, and San Francisco 2014 (BRKCOM-3003, BRKDCT-3444, and LABDCT-2333). He holds a master’s degree from Rutgers University in Electrical and Computer Engineering and has CCIE® certification (# 37139) in Routing/Switching, Service Provider & Data Center
Ask your Questions in the Discussion forums from February 12 through March 4, 2015
Currently doing a bgp rpki topology and set up an ubuntu server with an rpki validator and everything is working. Now, trying to connect my bgp routers to the rpki validator. I enter router bgp <as number> Then Device(confi...
As the title says, I have a 2921 with one EHWIC-D8ESG and one EHWIC-4ESG (plus one EHWIC-1GE-SFP-CU, which likely does not contribute to the problem). Both Gigabit multi-port EHWICs are connected to VLAN 10, configured as NAT inside. G0/1, G0/2 and G0/0/0...
Hi,recently i saw this MSG. on the log file but i cant understand what is the cause route of it LC/0/0/CPU0:Feb 26 21:46:30.694 UTC: fib_mgr: %ROUTING-FIB-4-RETRYDB_NONEMPTY : One or more FIB object(s) have been in IPv4 retry queue for at ...