Support Talks video- How to determine a legitimate hardware issue
(Live event - Thursday 13 May, 2020 at 9:30 am Pacific/ 12:30 pm Eastern / 6:30 pm Paris)
This event had place on Thursday 13th, May 13 at 9:30hrs PST
This event helps you to understand legitimate hardware failures versus other scenarios that present themselves as hardware issues but may be something else. Use cases, examples, and steps that can be taken to differentiate between these issues are be provided.
Ambrose Taylor is a Technical Leader with the Customer Delivery team at Cisco. He has over 10 years of experience in the IT industry. He has been working at Cisco for eight years, starting in the Catalyst Switching team in 2013. He has been a technical leader for Catalyst products for two years. Ambrose holds a CCIE Enterprise Infrastructure #60254.
Nathan Pan is a Technical Consulting Engineer with the Enterprise Routing and Switching team at Cisco. He has over five years of experience in the IT Industry. He has been working at Cisco for five years, starting in the Catalyst Switching team in 2016 and has been a Tech Lead in the Enterprise Switching team for three years. This year, Nathan will transition to Technical Leader for Catalyst products.
Everything workings fine with current HSRP setting.However, I am having a problem on the HSRP virtual gateway. Actually, the PC 192.168.1.13 & 192.168.1.14 are located at location B and pointed to the hsrp virtual gateway as their gateway. T...
I have configured a Pseudowire L2 Circuit between two vendor device(Device A Cisco ASR1002-X and Device B Mikrotik CCR1036). I want to achieve VLAN and priority transparency. Two Tester is connected with these devices. I am getting VLAN transparent from b...
Hello, I have been trying to configure my home network with cisco equipment for the purpose of learning. Currently, I have my ISP modem connected to a Cisco 1841 router. This router is connected to a Cisco Catalyst 3750 series switch and they ar...
Hi,We replace a Cisco 3750 switch with a new Cisco 9200 switch.We have an SFP 1000base-SX works well with the 3750. When we move it to Cisco 9200, the switch doesn't like it.The error is err-disabled.The new 9200 is:C9200-24PIOS is CA...
Looking at two different stacks of switches, both running the same ios. (150-1.SE2) both have lldp enabled (lldp run) On one switch, I'm showing the following:Gi1/0/6 auto on 24.5 Ieee PD 4 30.0Gi1/0/10 auto on 4.4 MINET_6920 1 30.0In this switch, I ...