This video walks you through the Configuration and Monitoring Aspects of Intelligent WAN (IWAN) which includes technologies like PfRv3, QOS, AVC and DMVPN using Cisco Prime Infrastructure 3.0. Below are the different sections of the video for easy viewing :
Introduction : Duration – 4 mins 40 s : Start Video at 0:00
IWAN Configuration (Green Field Deployment ) : Duration - Approx 10 mins : Start Video at 4:40
IWAN Configuration (Brown Field Deployment ) : Duration – Approx 4.5 mins : Start Video at 14:48
IWAN Monitoring (PfR, QOS and AVC) : Duration – Approx 18 mins : Start Video at 19:10
IWAN Monitoring Summary : Duration – Approx 3 mins : Start Video at 37:19
AVC Readiness Assessment : Duration – Approx 2 mins : Start Video at 40:05
Custom Application Creation for AVC : Duration – Approx 2 mins : Start Video at 42:36
Additional Prime Infrastructure 3.0 Videos can be found at :
Hi ,In right now study for CCNA exam and during my lab practices i have configure NAT overload on both Router after I able to configure ping is not working ! kindly i need you support to know were my missing configuration or mistake .On attachment i...
We are using DNA Center to deploy SD-Access.I have a question as follows,The DNA center had hardware failure and We didn't back up the DNA Center config file.(only have one DNAC)What is the procedure to next when DNA Center RMA back?&nbs...
When I try to access the webserver from PC7 (see screenshot), I am given a "server reset connection" error. Upon checking the packet, I observed that the router RTR-1 is swapping the Destination IP address with the Souce IP address. Is there a way to fix ...
I've got a 2Mbps mpls link as a VPN 0 transport on a vEdge 100m. Carrier drops ALL traffic it receives above 2Mbps. I want to treat all traffic the same but simply want it to get across the mpls link and not get dropped. I thought I could accomplish this ...