Meet the Authors video - How to Troubleshoot Network Problems with Vinit Jain
(Live event – Wednesday, February 12th, 2020 at 10:00 a.m. Pacific / 1:00 p.m. Eastern / 7:00 p.m. Paris)
This event had place on Wednesday 12th, February 2020 at 10hrs PDT
In this session, Cisco Press author and Technical Leader Vinit Jain talks about the best practices and approaches to troubleshoot complex network problems. During the session, Vinit presents key content featured in the book Troubleshooting BGP: A Practical Guide to Understanding and Troubleshooting BGP and its relevance to identify and solve the BGP-related issues that network professionals are most likely to encounter in real-world deployments, including problems that have caused massive network outages. In addition, Vinit talks about his upcoming publications.
This event provides an opportunity to interact with the author in real-time and learn more about him, his story, the story behind the book, and how.
Vinit Jain is a Technical Leader with the Technical Assistance Center (TAC) in the Cisco Customer Experience (CX) Organization providing escalation support in areas of routing and data center technologies. Vinit is an author for Cisco Press titles Troubleshooting BGP, Troubleshooting Cisco Nexus Switches and NX-OS, LISP - Implementing and Troubleshooting LISP on Cisco IOS-XE, IOS-XR and NX-OS and for the BGP Troubleshooting LiveLessons video series. Vinit is also a distinguished speaker at various networking forums, including Cisco Live events globally on various topics. Prior to joining Cisco, Vinit worked as a CCIE trainer and a network consultant. In addition to his CCIE (CCIE # 22854), he holds multiple certifications on programming and databases. Vinit holds a bachelor’s degree in mathematics and a master’s degree in information technology.
I'm able to ping ipv4 across LANs (IT host to Operator Host for example) But I can't get a ipv6 ping for the life of me, I enabled unicast routing and configured the hosts and devices to the address table (word doc linked below) help plz
hi,i got a 3850 switch running on a single PWR-C1-715WAC PSU onlywe got 2x spare of PWR-C1-350WAC and would like to use them both.am i correct to say these are hot-swappable, i.e insert 1x PWR-C1-350WAC in the spare PSU slot and then replace the existing ...
Hello, I have used Cisco 1921, and we forgot its login and password. I am trying to go into rommode for password recovery but am not able to.During router boot-up process I am using "special command > Break" to force rommode , router shows " Reado...
Good day!The following design is configured on the Cisco Catalyst 4500X switch:ip vrf test
snmp context vrf-test community vrf-test RO 10To request information, for example, on ospf neighbors, run:snmpbulkwalk -v 2c -c vrf-test 192.168.0.1 184.108.40.206.2.1.14....