SDWAN Evolution & Adoption

*Jul 17 10:31:35.615: %FABRIC-5-FABRIC_MODULE_BACKUP: The Switch Fabric Module in slot 4 became standby*Jul 17 10:31:42.439: %OIR-6-PWRFAILURE: Module 5 is being disabled due to power convertor failure. PMB registers are dumped as follows, R0= 0x0, R1= 0x... view more

VTPv3 overrides database

Created by _roman_ on 07-17-2019 03:13 AM

Hi, I read an article about the vtpv3 :https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-6500-series-switches/solution_guide_c78_508010.htmlIn it is stated that one of the advantages of vtp v3 is that : • Protection from uninte... view more

Cisco WS-C4503-E VSS Switch upgradation procedure

Created by preetpeethambaran on 07-17-2019 01:26 AM

Hi,I am looking for complete step by step upgradation commands for Cisco WS-C4503-E switches in VSS, as we have a scheduled activity next week for IOS upgradation. Currently Cisco 4503 is running on 03.07.03.E Version, please let me know the latest s... view more

Cisco DNAC 1.2.12

Created by Korkstaah on 07-17-2019 12:48 AM

Hi all Is there any way DNAC can pull detailed reports on the radio types of the clients connected to it, ie, 802.11ac vs 802.11n. Doing it via scripting hasnt really worked out and i was hoping that DNAC held this information somewhere. I... view more

Cisco 3850 High CPU due to fed

Created by supunit21 on 07-17-2019 12:32 AM

We have two 24 port 3850 switches stacked. Now CPU processing of the stack is very high and it causes the packet loss. Cisco shows fed (PunjectRx and Xcvr) process is mostly consuming the CPU. See the attached process output. Is there any solutions t... view more

CreatePlease to create content