cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
253
Views
0
Helpful
1
Replies

Cisco NDFC Multipod

config
Level 1
Level 1

Hello community.

I have started to learn NDFC solution and I have a question.

1. I'm going to deploy multipod  VXLAN EVPN fabric using NDFC. My topology has Multiarea OSPF (Area1-POD1, Area2-POD2) with different BGP AS (AS65001-POD1, AS65002-POD2). OSPF Area0 will be used as an Interpod underlay network with eBGP between POD-1 and POD-2. The topology looks as shown in the screenshot (below).

Do i need to create different NDFC fabrics? For example, The Fabric POD-1 for AS65001, and Fabric POD-2 for AS65002 as shown in the screenshot (below).

config_1-1729507805613.png

config_0-1729507762777.png

 

 

1 Accepted Solution

Accepted Solutions

nkhawaja1
Level 1
Level 1

Yes, there will be different Fabrics, not POD. there will be 3 FABs here, one will be the intersite network.

View solution in original post

1 Reply 1

nkhawaja1
Level 1
Level 1

Yes, there will be different Fabrics, not POD. there will be 3 FABs here, one will be the intersite network.

Review Cisco Networking for a $25 gift card