Nexus Devices

Hi Cisco Family,I'm experiencing an issue where I've just purchased a new Cisco Nexus 3064-X on which the n3000-uk9.5.0.3.U5.1f.bin image is installed. We've to enable features for each configurational protocol such as " Feature BGP or Feature OSPF" ...

Hi,I have some questions about installing new line cards in Cisco Nexus switches. The switches are working in VPC mode.1. ¿Is it possible to install the line cards while the devices are working? or is it necessary turn off each switch?2.Considering t...

The problem:  We have 2 Data Centers about 40 miles apart each with there own connection to the internet.. and also 2 wires between the N7Ks at each site for data center to data center.  Each data center has 6 switches...  two 7ks, 2 5ks, 2, 2ks.Alth...

It's been found that there was formerly a strong recommendation for the Nexus 7K-series switches (on page 27, 40), where under the following conditions:- Point-to-point routed links, terminating on a vPC domain- "Backup path routing" needed using l3 ...

We are working on a Hyper Convergence Infrastructure project and our designated switch is a pair of N9K-C9336C-FX2 (version 10.2(5) MR) to host our HCI servers (Lenovo Think Agile VX7531 Certified Node).Current Nexus9000 C9372TX hosting our three-tie...

Hi, I'm currently working on a Nexus9000 C93108TC-FX and trying to measure the time it takes for the ports to start. During the experiments, I found that the ports sometimes take way longer to start. I was digging through the log files to find that w...

Weird issue result of ping test with two fabrics(vxlan+evpn) Hello guys, We have hit into some weird issue in our test topology , Can you guys help us to fix the issue? thanks. Test environments: We have build a test topology with two same fabrics(vx...

I'm running into an issue where I cannot access the Nexus 9000v after deploying it through an OVA on my standalone ESXi server (No vCenter). Without vCenter I'm not able to use the serial feature that Cisco outlines in their documentation to work aro...

Hi kind of new to switches in general.I have one switch that has a bunch of interfaces and policies configured on it. I would like a way to copy the exact interface from one switch to another. They are the same switches. I just dont want to do interf...

Hello, My host_vars file as follows. -- loopbacks:- { interface: loopback0, addr: 30.30.30.30, mask: 32, tag: 54321 }- { interface: loopback1, addr: 10.200.200.22, mask: 32, tag: 54321 } --   Tasks file as follows.  name: CONFIGURE INTERFACE IP ADDRn...

Hello,I was wondering with vNX-OS can be utilized as switch connected to RYU controller.Based on the following excerpt of a document, it seems to be possible.I was wondering, if someone does have experience with this topic and where to find some more...